primer VD-AK-0150

primer
VD-AK-0150

Water-diluting, one-component, fast-drying acrylic primer for anti-corrosion protection of steel surfaces.
Water-dispersive anti-corrosion primer based on polyacrylatic resin. It is intended for anti-corrosion protection of metal surfaces (including freight wagons). It is recommended to use it in the system consisting of one layer of VD-AK-0150 Primer and one layer of VD-AK-654 Enamel. The primer is fire-explosion-proof, it does not contain VOC.


  • Data sheet
  • Paint systems
  • Industry application

Data sheet

Paint systems

Industry application

Technical specifications
Type Water-dispersive, one-component, fast-drying acrylic primer containing active anti-corrosion pigments.
Color Maroon
Glossiness Matt
Consumption, g/m2 300
Solvent Water
Way of application Airless spraying, combined or pneumatic spraying, with a brush, roller.
Drying time: Thickness of dry film is 40 µm:
+20ºC to degree 3 ("touch dry") - 1 hour.
+60ºC to degree 3 ("touch dry") - 0.5 hour.
Recommended thickness dry film: 40 - 50 µm
wet film: 100 - 130 µm
Ability to pass moisture At least 48% by mass
Instruction for use
Conditions of applying The surface should be dry.
When applying and hardening of the paint, the air temperature shouldn't fall below +5ºС.
Relative humidity of air should be 20-80%.
Temperature of a surface should be at least 3ºС higher than an air dew point.
Surface preparation Remove from the surface with the corresponding method oils, lubricants, salts and mechanical dirt (ISO 12944-4).
Steel surface: Treatment by abrasive blast cleaning to degree of Sa2½ (ISO 8501-1).
If abrasive blast cleaning is excluded, it is recommended to make thorough degreasing up to Degree 1 in accordance with GOST 9.402-2004.
Method of application By spray. Depending on the method of application, if necessary, dilute the base coat with water up to 5% by weight.
Recommended paint systems Система окраски по металлу ВД-АК-0150, ВД-АК-654
Tools cleaning When finished, the paint equipment and tools should be washed out with water.
Base-line of VOC for the product in the EU It does not contain volatile organic compounds
Storage 18 months (at a temperature from +5 up to +30ºC).

Система окраски БАСА ВД-АК-0150 ВД-АК-654

Наименование материала Толщина, мкм
Грунтовка ВД-АК-0150 40-50
Эмаль ВД-АК-654 35-40
Суммарная толщина 75-90

Recommended for use in the following industries:

  • mechanical engineering
  • metal structures
  • tube
  • temporary protection

There are recommendations for use and conclusions:

JSC VNIIZhT (Railway Research Institute)

web page

JSC "VNIIZHT" is the largest scientific center of the railway industry in the field of scientific-research and design developments. It can carry out the whole range of certification tests.
The Institute was founded in 1918 and in 2008 it was transformed into JSC "VNIIZHT" — a subsidiary of JSC "RZD".
Scientists of JSC "VNIIZHT» actively participate in solving of various important matters of the railway sector. 20 scientific divisions and centers, including 53 laboratories, implement а wide range of research works in all areas of railway transport: infrastructure, rolling stock, wheel-rail interaction system, transport material engineering, complex issues of network development, corporate economy, ecology and labor protection.
The total number of employees (including branches) is more than 1700 people, including 34 doctors of Sciences and 154 candidates of Sciences.


Research Institute of the Tube

web page

Ural Research Institute of the Tube & Pipe Industries was founded in 1961 on the basis of Decree of the Central Committee of the USSR Communist Party and the Council of Ministers from February 13, 1958. Due to recognition of Institute importance for Russia economy development the Institute was renamed to The Russian Research Institute of the Tube & Pipe Industries (ROSNITI) in 2001.


PromStroyNiiProject

web page

Lead Institute of Siberia and the Far East in the field of industrial design