primer BASA VD-AK-0125


Water-dispersive primer, based on polyacrylic resin, elastic, for exterior and interior works, used against microcracks, for long-term anti-corrosion protection of reinforced concrete structures of transport facilities and other mineral surfaces.
One-component elastic primer for exterior and interior work based on polyacrylic resin. It features an exceptional adhesion to the surface. Deeply penetrates into the substrate and fills all pores and microcracks in the concrete. Contains functional additives, providing protection against concrete destruction. Does not contain toxic components.

  • Data sheet
  • Paint systems
  • Industry application

Data sheet

Paint systems

Industry application

Technical specifications
Type One-component elastic primer for exterior and interior work against micro-cracks based on polyacrylic resin.
Hardener 1,3
Relative viscosity at a temperature of 20±2ºС by the VZ-246 viscometer with a nozzle diameter 4 mm, not less, sec. 60
Water resistance Resistance of the film to static effect of water at a temperature of 20°C not less than 12 hours.
Recommended quantity of solvent (water), not more, % 5
Ability to pass moisture Vapor-permeable
Non-volatile matter content, not less % 50
Color White
Glossiness Semi-matt (ISO 2813/60º)
Consumption, g/m2 300
The practical consumption is influenced by the quality of a surface, a way and conditions of application, a form of the painted surface.
Solvent Potable water
Way of application Air spraying, airless spraying
A long pile brush or roller at strip painting.
Time of drying to degree 3 at a temperature of +20°C and relative humidity of 65%, not more, hours 2,0
Instruction for use
Conditions of applying Temperature of air, the painted surface and primer should not be lower than +5ºС.
Temperature of a surface should be at least 3ºС higher than an air dew point.
Relative humidity of air should be below 80%.
The newly applied plaster can be primed after full curing, not earlier than after two weeks at a temperature of not less than +5°C and relative humidity not exceeding 80%.
Do not apply to the surface if rain or night frost can occur.
Surface preparation The surface must be dry before painting: there should be no film moisture, the surface must be moisture-air free by touch.
Chalky surfaces are cleaned until chalk or lime is completely removed.
Method of application Before use, the primer should be mixed thoroughly, avoiding the formation of foam.
Apply with spraying, with a brush or roller.
Recommended paint systems Paint system BASA-CONCRETE
Tools cleaning When finished, the paint equipment and tools should be washed out with water.
More information
Occupational & industrial safety Before application it is necessary to study attentively the text and precautionary designations on factory labels. Use in well-ventilated rooms.
Do not inhale dust. Avoid contacts with skin. In case of skin and eye exposure, immediately rinse with water and see a doctor.
Storage The primer should be stored and transported at a temperature above +5ºС.
The primer should be stored in the dry, cool, well-ventilated room, away from heat sources.
Package containing primer should be tightly closed.
Do not allow freezing during transporting and storage.

Paint system BASA-CONCRETE

Production name Thickness, mkm
Primer VD-AK-0125 80-120
Paint VD-AK-116 80-120
Total thickness 160-240

Recommended for use in the following industries:

  • создайте в массиве ключ транспортное строительство
  • создайте в массиве ключ металлические конструкции гражданско-промышленного назначения
  • infrastructure facilities

There are recommendations for use and conclusions:


web page

The Scientific Research Institute of Transport Construction was established in 1935, in 1993 it was transformed into a joint-stock company.
All these years, ZNIIS JSC provides reliability and security of construction and operation of complex and unique facilities.
The standard of the Institute is absence of complaints and unconditional fulfillment of obligations. That's why a significant part of our customers cooperate with ZNIIS JSC for years and decades. Since 2002 it has been accredited by TÜV (Germany) in accordance with ISO 9001 standard.
The institute has specialized laboratories and professionals in the field of certification of new building materials, corrosion protection, vibration protection, calculations and physical modeling of complex structures, testing of materials and structures.

NIIZHB "Research Institute of Concrete"

web page

Research Institute of Concrete and Reinforced Concrete (NIIZHB) named after A.A. Gvozdev – is the largest in Russia field-oriented institute of the construction sector with long-standing scientific traditions and own scientific schools.
For many years, scientists and engineers of NIIZHB ⁠named after A. A. Gvozdev have successfully worked with current issues of concrete and reinforced concrete theory, durability and reliability of concrete and reinforced concrete structures, created new types of concrete, reinforcement, and materials for fabrication of high-quality concretes, elaborated prefabricated and in-situ reinforced concrete structures in compliance with the modern construction requirements, efficient architectural and construction systems, computer design methods for concretes, concrete and reinforced concrete structures, technologies and equipment for their fabrication, and coordinated research work in these fields.