primer BASA 2K EP-0111TS


Two-component zinc-filled epoxy primer for priming and protecting steel surfaces in industrial and marine environments, steel structures of bridges, piers, tanks and pipelines of the oil and gas industry, etc.
A two-component epoxy zinc-filled primer with a high zinc content, which includes high-quality zinc flakes, spherical zinc and zinc powder. Zinc flakes, floating to the surface during the formation of the coating, make it difficult for water and other aggressive components to pass through to the protected metal, spherical zinc and zinc powder securely fill the gaps, forming reliable anti-corrosion protection with a powerful galvanic effect.
It is delivered in sets: primer basis and hardener.
2K EP-0111TS Epoxy Primer is used as the first priming layer in painting systems under conditions of marine or wet industrial environment in cases where long-term anti-corrosion protection of steel surfaces for various purposes is necessary: transport facilities, steel tanks, pipelines, sea and river vessels, waterworks, steel structures for various purposes, including those operated in aggressive environments, sea water, marine climate, immersed in the ground, in industries with an aggressive environment.

  • Data sheet
  • Industry application

Data sheet

Industry application

Technical specifications
Type Two-component zinc-filled epoxy primer with high content of zinc is delivered in a set: primer basis and hardener.
Hardener 2,7 ± 0,1
Relative viscosity at a temperature of 20±2°С by the VZ-246 viscometer with a nozzle diameter 4 mm, not less Тиксотропная
Non-volatile matter content, not less % 65±2
Color Grey Metallic
Glossiness Matt (ISO 2813/60º)
Solvent BASA 2K EP
Way of application Air spraying, airless spraying.
A long pile brush or roller at strip painting.
Drying time at a temperature of +20ºС and relative humidity of 85%, hours
Full cure
Instruction for use
Conditions of applying Temperature of air, the painted surface and primer shouldn't be lower than +5ºС.
Temperature of a surface should be at least 3ºС higher than an air dew point.
Surface preparation The surface should be clean and dry.
Steel. Blasting to a degree not less than Sa 2½ according to ISO 8501-1.2007.
Method of application Before application, carefully mix the primer throughout the container.
Apply with airless spraying, with a brush or roller in limited access areas.
Airless spraying:
Pressure: 15 MPa,
Nozzle diameter: 0.38 - 0.53 mm,
Spray angle: 40 - 80
Recommended paint systems Система окраски по металлу 2К ЭП-0111Ц, 2К ЭП-0110, 2К ПУ-110
Tools cleaning Upon work completion, the painting equipment and tools should be washed out with a recommended solvent.
More information
Occupational & industrial safety Before application it is necessary to study attentively the text and precautionary designations on factory labels.
Use in well-ventilated rooms. Do not inhale dust. Avoid contacts with skin.
In case of skin and eye exposure, immediately rinse with water and see a doctor.
Storage The primer should be stored and transported at a temperature not less than minus 10ºС and not higher than plus 30ºС.
The primer should be stored in the dry, cool, well-ventilated room, away from heat sources.
Package containing the primer and the hardener should be tightly closed.

Recommended for use in the following industries:

  • создайте в массиве ключ атомная энергетика
  • создайте в массиве ключ транспортное строительство
  • создайте в массиве ключ нефтегаз
  • infrastructure facilities

There are recommendations for use and conclusions:


web page

The Scientific Research Institute of Transport Construction was established in 1935, in 1993 it was transformed into a joint-stock company.
All these years, ZNIIS JSC provides reliability and security of construction and operation of complex and unique facilities.
The standard of the Institute is absence of complaints and unconditional fulfillment of obligations. That's why a significant part of our customers cooperate with ZNIIS JSC for years and decades. Since 2002 it has been accredited by TÜV (Germany) in accordance with ISO 9001 standard.
The institute has specialized laboratories and professionals in the field of certification of new building materials, corrosion protection, vibration protection, calculations and physical modeling of complex structures, testing of materials and structures.